Phone-alt

What we examine

We provide:

  • Supervision and comprehensive non-destructive testing of industrial installations (pressure equipment, boilers, tanks, process piping, turbines, etc.):
      – during construction
      – during maintenance / technological / diagnostic shutdowns
      – on an active installation – also at high temperatures
  • Supervision and comprehensive non-destructive testing of steel structures
  • Diagnostic testing of equipment and structures during their manufacturing / prefabrication
  • Testing of materials: casts, forgings, plates, etc.
  • Measurements of ovalisation and creep of pipelines
  • Comprehensive NDT+DT tests of welded joints carried out as part of welder examination for authorisations as per PN-EN 9606-1
  • Comprehensive NDT+DT tests of welded joints carried out as part of welding procedure qualification (WPS/WPQR) as per PN-EN ISO 15614

Our services are addressed at the refinery, petrochemical, chemical, energy, gas and oil transmission, cement manufacturing, food and other industries which require the test types performed by our laboratory.

We meet the requirements of the following regulations:

  • PN EN 1090
  • PN EN ISO-15614
  • ASME
  • PED
  • WUDT–UC–WO-W/11:10
  • DNV
  • AD2000
  • TRD
  • DVS
  • PN-EN ISO 9606-1
We are active all over Poland.

We perform rope access NDT.

Example projects

Some of our completed projects are listed below.

  • Non-destructive testing at the PTA plant in Włocławek for PKN Orlen S.A.
  • Non-destructive testing at the Olefiny II plant of the Manufacturing Facility of PKN ORLEN S.A in Płock.
  • MT, HT, PMI, UT & PT non-destructive testing of welded joints of a boiler – the structure and pressure elements of KH5 and KH6 within the TAMEH Polska sp. z o.o. facility in Kraków.
  • UT, UTT, MT, & RT non-destructive testing, length and angle measurements as part of the diagnostics of the pressure part and steam piping of boiler OP-380 K2 at EDF Polska S.A. Branch in Kraków.
  • Non-destructive testing (ultrasonic, ultrasonic thickness testing, magnetic particle testing, radiographic testing, length and angle measurements). of the TG1 turbine set at the Kogeneracja Wrocław plant.
  • Non-destructive testing of welds of the condensate storage tank: joining the condenser with the turbine and the condenser at Zakłady Azotowe "Puławy” – Unit No. 2.
  • Radiographic, penetrant and visual non-destructive testing at an Air Liquide facility – the extension of the Air Separation Plant in Kraków.

Copyright © 2023 Polimer Laboratory sp. z o.o.